Product ID:MG 400
MSDS Date:01/01/1989
FSC:3439
NIIN:00N041547
MSDS Number: BSSTF

MG INDUSTRIES-WELDING PRODUCTS

N94 W14355 GARWIN MACE DR
MENOMONEE FALLS, WI 53051
US

Emergency Phone: 414-255-5520

Info Phone: 414-255-5520

Cage: 3N803

MG INDUSTRIES-WELDING PRODUCTS

MENAMONEE FALLS, WI 53051 US

Telephone: 414-255-5520

Cage: 3N803

LITHIUM FLUORIDE

CAS: 7789-24-4

RTECS: OJ6125000

Fraction By Weight: 1-11%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F)

MAGNESIUM FLUORIDE

CAS: 7783-40-6

RTECS: OM3325000

Fraction By Weight: 1-11%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F)

POTASSIUM CHLORIDE

CAS: 7447-40-7

RTECS: TS8050000

Fraction By Weight: 1-11%

POTASSIUM FLUORIDE

CAS: 7789-23-3

RTECS: TT0700000

Fraction By Weight: 2-12%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F)

SODIUM CHLORIDE

CAS: 7647-14-5

RTECS: VZ4725000

Fraction By Weight: 1-11%

TO TOUCH LIVE ELECTRICAL PARTS & TO INSULATE

RTECS: 9999999ZZ

ALUMINUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 70-80%

OSHA PEL 15MG/M3 DUST;5 RESP

ACGIH TLV: 10MG/M3 DUST;5 FUME

SILICON

CAS: 7440-03-1

RTECS: VW0400000

Fraction By Weight: 1-11%

OSHA PEL 10 MG/M3 TDUST;5RESP

ACGIH TLV: 10 MG/M3 TDUST

ALUMINUM FLUORIDE

CAS: 7784-18-1

RTECS: BD0725000

Fraction By Weight: 1-11%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HLTH. INHAL: OVEREXP TO WELDING FUMES MAY RSLT IN DISCOMFORT SUCH
AS: DIZZ, NAUS/DRY/IRRIT OF NOSE, THROAT/EYES. CHRONIC:OVEREXP MAY
LEAD TO SIDEROSIS (IRON DEPO SITS IN LUNGS) & IS BELIEVED BY SOME
INVESTIGATORS TO AFFECT PULMONARY FUNCTION. ARC RAYS CAN INJURE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EYES & BURN SKIN. ELECTRIC SHOCK CAN
KILL.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATOR/ALLERGIC
CONDITIONS MAY BE AGGRAVATED IN SOME INDIVIDUALS.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY AMERICAN RED CROSS. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER.
CALL MD . EYE: IMMED FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15
MIN, SEEK ASSISTANCE FROM MD . INHAL:REMOVE TO FRESH AIR. SUPPORT
BRTHG (GIVE O*2/ARTF RESP) (PF N). INGEST: CALL MD IMMED .

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES. REFER TO AMERICAN NATIONAL STANDARD Z49.1 FOR FIRE
PREVENTION DURING WELDING.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ONE WAY TO DETERMINE FUMES/GASES IS TO
TAKE SAMPLE INSIDE HELMET/BREATHING ZONE.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PRECAUTIONARY
LBL ON PROD. SEE AMERICAN NATL STD Z-49.1, SFTY IN WELDING &
CUTTING, PUBLISHED BY AMERICAN WELDING SOCIETY, P.O. BOX 351040,
MIAMI, FL 33135 & OSH A PUBLICATION 2206 (29CFR1910), (SUPDAT)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME RESP/AIR
SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE/WHERE LOC
EXHAUST OR VENT DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHAUST @ ARC, OR BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKERS BRTHG ZONE & GEN (SUPP DATA)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:PROTECTIVE FCESHLD W/APPROP FILTER LENS.
Other Protective Equipment:WEAR HEAD, HAND & BODY PROT. MAY INCL ARM
PROTECTORS, APRONS, HATS, SHOULDER PROT, AS WELL AS DARK (SUPP
DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP: GASEOUS RXN PROD MAY INCL CARBON MONOXIDE & CARBON DIOXIDE.
OZONE & NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC IN WELDING.
OTHER PREC: U.S. GOVT PRINTING OFFICE, WASHINGTON D.C. 20402 .
VENT: AREA. TRAIN WELDER TO KEEP HIS HEAD OUT OF FUMES. OTHER PROT
EQUIP: SUBSTANTIAL CLTHG. TRAIN WELDER NOT (ING 9)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:REASONABLY EXPECTED FUME CONSTITUENTS
WOULD INCL FLUORIDES, CHLORIDES, & COMPLEX OXIDES OF ALUMINUM &
SILICON. (SUPDAT)

Waste Disposal Methods:DISPOSE OF ANY GRINDING DUST OR WASTE RESIDUES
IN ACCORDANCE WITH EPA OR LOCAL, FEDERAL AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.